The TMF Milk Feeders fully automatic machines work buy constantly providing a feed of pre mixed powdered milk and warm water. As the milk is consumed the level drops, once the level drops below a pre set point the machine will mix up another feed.
The machine has a powder hopper at the top and a heated water tank in the bottom. The water temperature is controlled by an adjustable thermostat.
When the machine is triggered to feed it feeds warm water, milk powder and mixes all automatically. The amount of milk powder that is dispensed is fixed, but the amount of water is adjustable to allow simple accurate calibration of the machine.
These machines can be easily installed into any type of building.
The TMF Milk Feeders fully automatic machines work buy constantly providing a feed of pre mixed powdered milk and warm water. As the milk mixture is consumed the level drops, once the level drops below a pre set point the machine will mix up another feed.
The machine has a powder hopper at the top and a heated water tank in the bottom. The water temperature is controlled by an adjustable thermostat. When the machine is triggered to feed it feeds warm water, milk powder and mixes all automatically. On the Eurolouve the amount of milk powder that is dispensed is fixed, but the amount of water is adjustable to allow simple accurate calibration of the machine. The Nurselac allows the amount of milk powder and water to be adjusted. This allows the operator to set the machine up to mix feeds from 250ml to a massive 1000ml. If the water temperature were to exceed 60°C it would cut out until the water cools down.
These machines can be easily installed into any type of building.